Hwy 354 North from Kennetcook, left onto Emerson White Loop (right before the Esso at 7349 Hwy 354). Lumber mill site for sale - Sold as is / where is. -4 PID's just over 25+/- acres total. -Saw mill on site constructed in 1992 with 20' ceiling height - and average production of 70,000 board foot per day. Measurements are 39.7 x 121.5 + 13.6x22.11 + 20x29.2 (5518 sqft) -2 kilns with 55, 000 board feet capacity each on site. Kilns were built in 1992 and heated by wood chips from the boiler building on-site. -Office building is 1.5 storeys and is heated by electric heat. Measurements are 25x46 (plus 2 storey portion)(1916 sqft) -The planner Mill was built new in 2003. It features 19' ceilings, planer included is refurbished Yates A20. Measurements are 100.3x55.2 + 59.11x48.4 (8426 sqft). -The onsite garage is 30x70 with two 14' doors and 16' ceiling height. (2100 sqft) -The boiler building is 42x33+jog for the shavings room, and is used for heating the kilns (1386 sqft) -The saw mill operation has not been operationally working since 2007. Only the boiler building has power connected. The other buildings have had power disconnected for a few years. (id:27476)
